Go to Source
|Top Previous Next|
The menu item ‘Go to Source’ is used to check the connection between hub and target. ‘Go to Source’ is found on the ReferenceTarget SmartTag menu as shown in Figure 18.
►To check the connection between a linked ReferenceTarget and ReferenceHub:
1.Select the ReferenceTarget. Click the SmartTag.
2.In the Tasks menu, click ‘Go to Source’.
3.If the hub and target are properly linked, the page containing the ReferenceHub will become visible (as it moves to the front of the tab list), and the ReferenceHub will be selected.